Vaseverse › Free 3D vase models › Tulip Vase
Tulip Vase: free 3D printable vase to customize
Six rounded petals that open like a tulip. Open it in the free Vaseverse generator, customize it in 3D and print it on any FDM 3D printer.
Specs
| Height | 170 mm |
| Maximum diameter | 104 mm |
| Wall thickness | 1.6 mm (4+ perimeters at 0.4 mm) |
| Base thickness | 2.4 mm, closed base |
| Filament | about 92 g of PLA |
| File | exported as STL or 3MF from the generator: one watertight part, in millimetres |
How to print the Tulip Vase
Print it upright with a 0.4 mm nozzle and a 0.2 mm layer height. No supports needed. Use 4 perimeters, 3 bottom layers and low infill, since the walls are almost solid anyway. PLA and PETG both work well.
PLA is not reliably watertight. For fresh flowers, put a small glass or jar inside, or use dried or faux flowers.
Make it your own
Want a different height, shape or twist? Open the free Vaseverse vase generator, adjust the vase in 3D or AR, and export your own STL.
License
Free to print and sell prints of, under CC BY 4.0. Please credit "Vaseverse" with a link to vaseverse.org.
