Vaseverse › Hydroponic towers · Italiano
3D printable hydroponic tower generator
Build a vertical garden: stackable levels with angled planting pockets on top of a reservoir, with a support for the pump hose and baskets for the plants. Set it up in your browser and download STL or 3MF.
Open the hydroponic tower generatorFree 3D vase models
Free, no account, no ads. Runs in the browser on phone and computer.
What it does
| Levels | 1 to 10, each printed separately |
| Pockets | 0 to 6 per level, rotated between levels so plants do not shade each other |
| Tube | 70 to 160 mm in diameter, 60 to 250 mm per level |
| Pockets size | 30 to 80 mm, tilted 45° to 70°, reaching out 8 to 60 mm |
| Joints | each level slots into the one below on a 45° lead-in, with notches that set the rotation |
| Pump hose | a cross at the bottom of each joint keeps a hose up to 20 mm in the centre |
| Reservoir | the pot becomes the water tank; baskets for the plants as separate parts |
A hydroponic tower moves water from a reservoir to the top with a small pump; the water runs down through every level and back into the tank. Vaseverse designs the printable parts: the reservoir, the levels with their planting pockets, and the baskets.
Every level slots into the one below with a spigot and rests on a 45° lead-in, so it prints without supports and the water that runs down stays inside. Notches let each level go in only one way, already rotated, and pockets and baskets are angled enough to print without supports too.
How it works
- Open the generator: it starts with a four-level tower on its reservoir.
- In Tower set levels, pockets per level, rotation, tube size and pocket angle.
- Add the hose cross, the notches and the baskets; change the reservoir shape in Shape and Surface.
- Download STL or 3MF: one file per part, ready for the slicer.
Open the hydroponic tower generator
Printing tips
- PETG is a common choice for parts that stay in water and sun; PLA works indoors.
- Use four walls or more on the levels and the reservoir, so they do not seep.
- Any small submersible pump works, as long as its hose fits the cross (up to 20 mm).
Questions
Do I need supports?
No. Joints rest on 45° lead-ins and pockets are tilted at 45° or more, so every part prints upright without supports.
How many plants can it hold?
Up to 6 pockets per level and up to 10 levels: you choose how tall and how dense the tower is.
Is it free?
Yes, free, with no account and no ads.
Which files do I get?
One STL per part, or a single 3MF with all the parts already on the plate.
